Advanced Services - Cisco ONS Time-Division Multiplexing Synchronous Digital Hierarchy Release 9.0 (SDH)
Profil słuchaczy
This course is for technical professionals who:
- Perform maintenance on SDH networks
- Design and engineer SDH networks
- Need an understanding of SDH transport network components, interconnection, circuit building, and maintenance
Prerequisites
Following is the prerequisite for this course:
- Knowledge of E1, E3, and SDH
Cel szkolenia
This lab-intensive course introduces you to the Cisco® Optical Network System (ONS) time-division multiplexing (TDM) family of transport products. The ONS 15454 SDH and ONS 15310 SDH are synchronous digital hierarchy (SDH) transport system components that can be mixed and matched to create high-speed optical transport networks. You will learn about the SDH optical hierarchy STM-1 (155 Mbps), STM-4 (644 Mbps), STM-16 (2.5 Gbps), and STM-64 (10 Gbps). You will learn how E-1 (2 Mbps) and E3 (35 Mbps) electrical signals are carried in the SDH optical links. Included in this course is how to configure and build circuits through the ADM10G card, a TDM card in the ONS 15454 DWDM system. The course covers electrical, Ethernet, and optical protection options; linear and ring topologies; circuit building; and troubleshooting. Each student team has an ONS 15454 SDH and ONS 15310 SDH to work with.
Program szkolenia
Course Outline
- ONS 15454E and 15310E Product Overview
- Introduction to SDH
- Safety in ONS Systems
- Optical Fiber Practices
- Cisco ONS Documentation
- Cisco ONS 15454E MSPP Shelf Layout and Components
- Cisco ONS 15310E Shelf Layout and Components
- Cisco ONS System Setup and Login
- Timing for SDH
- Cisco ONS Protection Groups
- Point-to-Point and Linear Add-Drop Multiplexer Configurations
- Cisco ONS Circuits and Cross-Connections
- Cisco ONS Path Protection Rings
- Cisco ONS VC Tunnels and Circuits
- Cisco ONS Line Protection Rings
- Maintenance and Performance Monitoring
- Loopbacks in Fiber, Copper, and Coax
- ADM10G Introduction
- Protection in the ADM-10G Subnetwork
- Circuits in the ADM-10G Subnetwork
- Introduction to Ethernet
- Cisco ONS Multiservice over SDH Applications and Layer 1 Circuits
- Rapid Packet Ring Network and Circuits
- Bridge-and-Roll Circuit Feature
- Delete a Line-Switched Node
- Add a Line-Switched Node
Lab Outline
- Lab 1: Cisco Transport Controller Setup and Login
- Lab 2: Configuring SDH Timing
- Lab 3: Setting Up Protection Groups
- Lab 4: Provision and Test a Point-to-Point Network
- Lab 5: Create Manually Routed E3 Circuits
- Lab 6: Create a Path-Protected Ring
- Lab 7: Create VC12 Tunnels and Circuits
- Lab 8: Create a Two-Fiber Line-Protected Ring
- Lab 9: Create and Test Ethernet Circuits at Layer 1
- Lab 10: Create and Test RPR Ethernet Ring at Layer 2
- Lab 11: Set Up SDH Links to ADM-10G with Protection
- Lab 12: Configure Circuits in ADM-10G Subnetwork
- Lab 13: Bridge-and-Roll Circuits
- Lab 14: Delete Line-Switched Node
- Lab 15: Add Line-Switched Node
- Lab 16: Troubleshooting Lab
Polska
Currently no local training dates available.