> > > OPT300 Detailed outline

Cisco Optical Technology Advanced (OPT300)

Course Description Schedule Course Outline

Detailed Course Outline

Module 1: Cisco Transport Planner Design Tool

  • Getting Started with the Transport Planner
  • Using the Transport Planner
  • Generating the Final Files

Module 2: Cisco Transport Controller Operations

  • Exploring the Fundamentals of the Transport Controller
  • Discovering the Transport Controller Views
  • Working with Windows Within Windows
  • Provisioning the Shelf
  • Maintaining the Shelf

Module 3: Manual Multiring and Mesh Network Using the ONS 15454 40-WXC Card

  • Manual Multiring
  • Back-to-Back Transponders
  • Mesh Network Concepts
  • Mesh Network Example
  • Multiring Details
  • Patch Panel and Amplifiers
  • Mesh Cards
  • 50-GHz Interleaver

Module 4: Node Turn-Up

  • Cisco Transport Planner Configuration Source File
  • Procedure for Releases 9.1 and Later
  • Provision the Optical Service Channel (OSC)
  • Verify OSC Transmit Power
  • Create and Delete Connections

Module 5: OCHNC Circuits

  • OCHNC Prerequisites
  • Create an OCHNC
  • Circuit States
  • Verify the Amplifiers
  • Verify the Remaining OCHNC Tasks
  • View Power Levels in a WSS/WXC Mesh Network

Module 6: MSTP M6 SMR-Based Rings

  • SMR-Based Configurations
  • 4-Degree Mesh Using SMR-2
  • Functional View in Release 10.1 and Later
  • Viewing Individual Channel Power Levels

Module 7: OCHNC Circuits in SMR

  • OCHNC Prerequisites
  • Create an OCHNC
  • Circuit States

Module 8: G.709 Encapsulation 10G and 100G Transponder Settings

  • ITU-T G.709 Standard
  • Optical Transport Unit (OTU) Options in 10G Transponder
  • OTU Options in 100G Transponder

Module 9: 10 Gigabit Muxponder and Transponder Cards

  • 10G Transponder and Muxponder Cards
  • 10G Transponders
  • Muxponders
  • 10x10 Card
  • Installing 10G Circuit with 10x10 Card
  • Performance Monitoring Capabilities

Module 10: Generic Framing Protocol G.7041, Multiplexer Cards, and Encapsulation Options

  • Standard G.7041
  • Cards Using GFP

Module 11: Any-Rate Muxponder and Crossponder Cards

  • Discovering the Any-Rate Cards
  • Exploring Any-Rate Allowed Payloads
  • Reviewing the Any-Rate Card Modes
  • Reviewing Any-Rate Mixed Modes
  • Provisioning the Any-Rate Cards

Module 12: Ethernet and VLANs

  • Ethernet
  • Virtual LANs

Module 13: 10GE-XP and GE-XP Enhanced Cards, Settings, and Circuits

  • Layer 1
  • 10GE_XP and GE_XP Card Options
  • 10GE_XP/XPE and GE_XP/XPE Pluggable Port Modules and G.709 Settings
  • Provisioning Items Common to 10GE_XP/XPE and GE_XP/XPE
  • 10GE_XP/XPE and GE_XP/XPE Circuits
  • 10GE_XP/XPE and GE_XP/XPE Performance Counts

Module 14: Quality of Service

  • Quality of Service
  • Example Crossponder Settings

Module 15: XP-E Cards Protected Ring, CoS Marking by Port, Customer VLAN, and QoS

  • Setting the 10GE_XP and GE_XP Card Options
  • Configuring the Layer 2 Circuit Using OCH-Trail
  • Provisioning Layer 2 Settings for Connectivity
  • Creating Layer Circuit from Network Layer 2 Window

Module 16: T1 over Ethernet in a Crossponder Network

  • Exploring the Constant Bit Rate DS1 and DS3
  • Investigating T1/T3 over Fast Ethernet
  • Installing the T1 over Ethernet SFP and the Physical Interface
  • Installing the T1 over Ethernet in the Crossponder Network

Module 17: 100 and 200 Gigabit Transponders and Muxponders

  • 100- and 200-Gbps Cards
  • Client Port Types
  • Card Configurations

Module 18: Cisco 10G Network Encryption Card

  • Examining the Wire Speed Encryption (WSE) Card
  • Modes of Operation
  • Security Management
  • Protection
  • Installation and Turn-Up of the WSE Card

Module 19: Add-a-Node Design and Installation

  • Adding a New Node in Cisco Transport Planner
  • Create Installation Package
  • Insert New Node
  • Add Circuits into New Node

Module 20: Basic Troubleshooting

  • ONS 15454 DWDM Troubleshooting Guide
  • Hierarchy of Alarms
  • Functional View

Lab Outline

  • Lab 1: Start the Cisco Transport Planner Software and Create a DWDM Network
  • Lab 2: Configure the Cisco Transport Controller and Display Network
  • Lab 3: Establish 6-Node 40- and 80-Channel Mesh Networks
  • Lab 4: Create Circuits and View Power Levels in 40 and 80 WXC Networks
  • Lab 5: Establish 6-Node SMR1 and SMR2 Mesh Networks
  • Lab 6: Create Circuits and View Power Levels in SMR1 and SMR2 Networks
  • Lab 7: Establish 10G Transponder Circuits
  • Lab 8: Any-Rate Muxponder and Crossponder Options 8:2 configuration
  • Lab 9: 1G and 10G Crossponder Layer 1 Network
  • Lab 10: 1G and 10G Enhanced Crossponder Layer Two-Ring Configuration
  • Lab 11: Circuits to Carry T1 over Ethernet
  • Lab 12: 100 Gigabit Transponders and 10x10 Muxponders
  • Lab 13: 10G Encryption Card Circuit
  • Lab 14: Add a Node to a 6-Node Mesh Network
  • Lab 15: MSTP Troubleshooting
 

Cookies help us deliver our services. By using our services, you agree to our use of cookies.   Got it!