> > > FLEXADVANCED Detailed outline

Cisco NCS 2000 Deploying 96-Channel Flex Spectrum with Advanced Topics (FLEXADVANCED)

Course Description Schedule Course Outline Lab Topology

Detailed Course Outline

Module 1: DWDM and Flex Spectrum Foundation

  • Introducing DWDM Terminology and Components
  • What Is DWDM?
  • DWDM Shelf Common Components
  • Multishelf Node Basics
  • Exploring Flex Spectrum Features
  • What Is Flex Spectrum?
  • Additional Flex Spectrum Features
  • Legacy vs. Flex Spectrum channels
  • Legacy vs. Flex Spectrum optical network design
  • Legacy ROADM operation (Broadcast and Select)
  • Flex Spectrum ROADM operation (Select and Route)
  • Legacy vs. Flex Spectrum passive units
  • Introducing Network Topologies and Nodes
  • DWDM Topologies
  • Five Common 96-Channel Node Types
  • Introducing the Management Software and Documentation
  • Software for Design, O&M, and Network Management
  • NCS 2000 Series Documentation

Module 2: NCS 2000 Chassis and Cards

  • Investigating the NCS 2000 Series Chassis and Common Equipment
  • NCS 2000 Series Shelves for Flex Spectrum
  • Common Equipment
  • Investigating NCS 2000 Series Cards
  • NCS 2000 Series Flex Spectrum Nodes and Cards description
  • Controller Cards for NCS 2002, NCS 2006, and 2015 shelves
  • Transponder, Muxponder, and Crossponder Cards
  • Coherent Transponders
  • 40Gbps Transponder Cards
  • 100Gbps Transponder Cards
  • 200Gbps Transponder Cards
  • 400Gbps Transponder Cards
  • Add/Drop (Multiplexer/Demultiplexer) Cards
  • Legacy and Flex Spectrum Amplifier Cards
  • Miscellaneous Cards
  • Passive Auxiliary Modules
  • Flex Spectrum Chassis and Card Summary

Module 3: Design ROADM Networks with Transport Planner

  • Getting Started with Transport Planner
  • Transport Planner Fundamentals
  • Perform Price Updates Before Network Design
  • Network Design’s Five Main Steps
  • Using Site Connection View
  • Designing a 2-Degree ROADM Network
  • ROADM Node Basics
  • Designing the ROADM Network
  • Designing for P-2-P Maximum Distance
  • Designing for Linear Maximum Distance
  • Editing Design and Creating New Copy to Compare
  • Examining the Connections
  • Examining the CTP Design Reports

Module 4: Hardware Installation and Multishelf

  • Installing NCS 2000 Series Hardware
  • Equipment to Rack-Mount
  • NCS 2015 and NCS 2006 Basic Installation Steps
  • NCS 2002 Basic Installation Steps
  • Configuring Multishelf Networks
  • Multishelf Configuration Notes
  • Provisioning 2015 Multishelf
  • Provisioning 2006 Multishelf
  • Connectivity and Placement for Flex Spectrum Passive Units

Module 5: Node Turn-Up and Circuit Creation

  • Performing Node Turn-Up in Transport Controller
  • Four Phases of DWDM Network Building
  • Node Turn-Up Steps
  • Overview of WSON and NON-WSON Circuits
  • Overview of OCHNC, OCHCC, and OCHTRAIL circuits
  • Explanation of Optical Supervisory Channel for management purposes
  • The difference between OSC and PPC
  • Creating Optical Channel Network Connection (OCHNC) Circuits
  • OCHNC Basics and Prerequisites
  • Create an OCHNC in a Wavelength Switched Optical Network (WSON)
  • Post Creation Verification of Amplifier as well as Optical Power Levels in The System
  • Creating an Optical Channel Client Connection (OCHCC) Circuit
  • OCHCC Creation Prerequisites
  • OCHCC Circuit Results
  • Install and Provision 10G Transponder Card
  • Install and Provision 10x10G Transponder Card
  • Install and Provision Coherent Transponder Card
  • Create Internal Connections/Patchcords
  • Create an OCHCC Circuit

Module 6: Advanced Feature Networks and Circuits

  • G.709 Encapsulation 10G and 100G Transponder Settings
  • Generic Framing Protocol G.7041, Any-Rate Cards, and Encapsulation Options
  • Any-Rate Muxponder and Crossponder Cards
  • Ethernet and VLANs
  • CVLAN, SVLAN, and QinQ mapping in Crossponder cards
  • 10GE-XP and GE-XP Enhanced Cards, Settings, and Circuits Layer 1
  • Quality of Service
  • XP-E Cards Protected Ring, CoS Marking by Port, Customer VLAN, and QoS
  • T1 over Ethernet in a Crossponder Network
  • Creating Colorless and Contentionless Add/Drop Networks
  • Colorless Port Basics
  • Contentionless Port Basics
  • Creating Colorless Demands
  • Complex Colorless Designs
  • Creating a Colorless OCHCC
  • Creating Omnidirectional and Contentionless Add/Drop Networks
  • Omnidirectional Add/Drop Basics
  • Omnidirectional 4-, 8-, and 12-Degree Mesh
  • 4-, 8-, and 12-Degree Omnidirectional and Colorless
  • Contentionless Add/Drop
  • Creating Mesh Nodes with MPO Cross
  • Connects
  • Create a Mesh Node
  • Create an 8-Degree Node
  • Building Blocks for Mesh Nodes
  • Verifying Installed Cabling Connections for 20-SMR-FS-CV Cards
  • Connections Verification (CV) Feature
  • Initial Setup for CV
  • Install a Test Passive Unit
  • Monitor a Loss Verification Test
  • Power Levels in MF Modules
  • Add a node to the existing design

Module 7: Testing, Maintenance, and Basic Troubleshooting

  • Testing Optical Time Domain Reflectometers (OTDRs)
  • OTDR Fundamentals
  • Running OTDR
  • Maintaining the Network, Shelf, and Cards
  • Network Maintenance Features
  • Node Maintenance Features
  • Shelf Maintenance Features
  • Card Maintenance and Performance Features
  • Performing Basic Troubleshooting
  • Troubleshooting Guide Layout
  • Hierarchy of Alarms
  • Using Functional View for Troubleshooting
 

Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.   Got it!