Implementing HP StorageWorks Enterprise Virtual Array Solutions v9.21- 00110364 (HH705)


Kimler katılmalı

This course is primarily intended for Pre-Sales Technical personnel. A secondary audience is HP employees, customers, and partners with an interest in learning about the installation, configuration and support of the Enterprise Virtual Array storage solutions.


Recommended prerequisite training:

  • Storage Basics for Better TCE
  • Storage Change Management
  • Storage Technologies Web-Based Training (WBT)
  • HP StorageWorks Full-Line Technical WBT
  • Introduction to Storage Area Networks Computer-Based Training (CBT)
  • Storage Area Network Fundamentals
  • Compaq StorageWorks Virtualization Concepts WBT
  • HP StorageWorks Enterprise Virtual Array Product Overview
  • The student should also be familiar with OpenView and SANworks software products through the appropriate courses.

Kurs hedefi

Upon completion of this course, students should be able to:

  • Identify the terminology used with the EVA and virtual storage.
  • Identify the physical, management, and interconnect functions of the HSV controllers, Management Module, disk drive enclosures, FC-AL drives, and Fibre Channel loop witch.
  • Locate EVA storage system hardware, and set up and operate components of the HSV controller and disk drive enclosure.
  • Use the Management Module and its web-based OCP (WOCP) to access storage system management functions.
  • Connect to the Fibre Channel loop switch and use its available interfaces to perform basic functions.
  • Describe the rack models, power cabling, and cabling configurations for all models.
  • Describe the features and functions of the initial storage and host configuration software called HP SmartStart for EVA Storage.
  • Use HP SmartStart for EVA Storage to initially configure storage and hosts for the EVA4400.
  • Identify the features and functions of Command View EVA.
  • Describe how to configure and monitor storage and hosts with Command View EVA.
  • Use Command View EVA to configure and monitor storage and hosts.
  • Identify features and functions of the Storage System Scripting Utility (SSSU) and use the utility to configure storage and hosts.
  • Describe the event reporting and notification mechanisms used to support the EVA.
  • Open and view various event logs.
  • Use remote and local event notification options.
  • Identify features and functions of local and remote replication software.
  • Install, configure, and use local replication software.
  • Describe basic diagnostic sources and how to use those tools to perform basic troubleshooting.
  • Identify customer self repair (CSR) components and follow procedures to remove and replace components.
  • Describe best practices for configuring the EVA with optimization for availability, performance, or cost.
Classroom training
Modality: G

Süre 5 Gün

Kurs tarihleri

Şu anda bu Kurs için herhangi bir eğitim tarihleri bulunmamaktadır.  Enquire a date